Publisher profile
American Water Works Association
Applies to: North America
Is this your organization? Raise a concern or correction
Item standards
- ANSI/AWWA A21.51/C115
- AWWA A760
- AWWA A796
- AWWA B300Hypochlorites
- AWWA B301Liquid Chlorine
- AWWA C104/A21.4Cement-Mortar Lining for Ductile-Iron Pipe and Fittings
- AWWA C105Polyethylene Encasement for Ductile-Iron Pipe Systems
- AWWA C110Ductile-Iron and Gray-Iron Fittings
- AWWA C111/A21.11Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings (AWWA C111/A21.11)
- AWWA C111/ANSI A21.11Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings (AWWA C111/ANSI A21.11)
- AWWA C150/ANSI A21.50Thickness Design of Ductile-Iron Pipe
- AWWA C151/A21.51Ductile-Iron Pipe, Centrifugally Cast
- AWWA C153/A21.53Ductile-Iron Compact Fittings
- AWWA C200Steel Water Pipe, 6 In. (150 mm) and Larger
- AWWA C207Steel Pipe Flanges for Waterworks Service, Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)
- AWWA C210Liquid-Epoxy Coatings and Linings for Steel Water Pipe and Fittings
- AWWA C213Fusion-Bonded Epoxy Coatings and Linings for Steel Water Pipe and Fittings
- AWWA C217Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings
- AWWA C219-91Bolted, Sleeve-Type Couplings for Plain-End Pipe
- AWWA C223Fabricated-Steel and Stainless-Steel Tapping Sleeves
- AWWA C227Bolted, Split-Sleeve Restrained and Nonrestrained Couplings for Plain-End Pipe
- AWWA C301Prestressed Concrete Pressure Pipe, Steel-Cylinder Type
- AWWA C303Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type
- AWWA C500Metal-Seated Gate Valves for Water Supply Service
- AWWA C502Dry-Barrel Fire Hydrants
- AWWA C504Rubber-Seated Butterfly Valves
- AWWA C509Resilient-Seated Gate Valves for Water Supply Service
- AWWA C515Reduced-Wall, Resilient-Seated Gate Valves for Water Supply Service
- AWWA C550Protective Interior Coatings for Valves and Hydrants
- AWWA C600Installation of Ductile-Iron Mains and Their Appurtenances
- AWWA C605Underground Installation of Polyvinyl Chloride (PVC) and Molecularly Oriented PVC (PVCO) Pressure Pipe and Fittings
- AWWA C606Grooved and Shouldered Joints
- AWWA C651Disinfecting Water Mains
- AWWA C655Field Dechlorination
- AWWA C800Underground Service Line Valves and Fittings
- AWWA C900Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 4 In. Through 60 In. (100 mm Through 1,500 mm)
- AWWA C901-88Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. Through 3 In., for Water Service
- AWWA C903Polyethylene-Aluminum-Polyethylene (PE-AL-PE) Composite Pressure Pipe, Tubing, and Fittings
- AWWA C904Cross-Linked Polyethylene (PEX) Pressure Tubing, 1/2 In. Through 3 In., for Water Service
- AWWA C905Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. (350 mm Through 1,200 mm), for Water Transmission and Distribution
- AWWA C906Polyethylene (PE) Pressure Pipe and Fittings, 4 In. Through 65 In. (100 mm Through 1,650 mm), for Waterworks
- AWWA C907Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings, 4 In. Through 12 In. (100 mm Through 300 mm)
- AWWA C909Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. (100 mm) and Larger
- AWWA D100Welded Carbon Steel Tanks for Water Storage
- AWWA D110Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.