Publisher profile
Carleton University
Applies to: Ottawa, Ontario, Canada
Is this your organization? Raise a concern or correction
Item standards
- CU DG 01 11 00Summary of Work
- CU DG 01 12 00Multiple Contract Summary
- CU DG 01 14 00Work Restrictions
- CU DG 01 14 25Designated Substances Report
- CU DG 01 21 00Allowances
- CU DG 01 23 00Alternatives
- CU DG 01 29 00Payment Procedures
- CU DG 01 31 19Project Meetings
- CU DG 01 33 00Submittal Procedures
- CU DG 01 33 29Sustainable Design Reporting
- CU DG 01 35 13.43Special Project Procedures for Contaminated Sites
- CU DG 01 35 13.93Special Project Procedures during COVID-19 Pandemic
- CU DG 01 35 43Environmental Procedures
- CU DG 01 41 00Regulatory Requirements
- CU DG 01 43 00Quality Assurance
- CU DG 01 45 00Quality Control
- CU DG 01 47 13Sustainable Requirements: Concept Design
- CU DG 01 47 15Sustainable Requirements: Construction
- CU DG 01 51 00Temporary Utilities
- CU DG 01 52 00Construction Facilities
- CU DG 01 55 26Traffic Control
- CU DG 01 56 00Temporary Barriers and Enclosures
- CU DG 01 74 00Cleaning
- CU DG 01 74 19Waste Management and Disposal
- CU DG 01 77 00Closeout Procedures and Submittals
- CU DG 01 79 00Demonstration and Training
- CU DG 01 91 13General Commissioning Requirements
- CU DG 01 91 13.13Commissioning Plan
- CU DG 01 91 13.16Commissioning Forms
- CU DG 03 30 00Cast-In-Place Concrete and Steel Deck
- CU DG 04 80 00Masonry and Stone Work
- CU DG 05 10 00Metal Stairs and Ladders
- CU DG 05 21 00Steel Joist Framing
- CU DG 05 31 00Steel Decking
- CU DG 05 50 00Metal Fabrications
- CU DG 06 05 73Wood Treatment
- CU DG 06 08 99Rough Carpentry for Minor Works
- CU DG 06 10 53Miscellaneous Rough Carpentry
- CU DG 06 20 00Finish Carpentry
- CU DG 06 40 00Architectural Woodwork
- CU DG 06 40 23.13Plastic Laminate Finishing for Interior Architectural Woodwork
- CU DG 06 41 93Cabinet and Miscellaneous Hardware
- CU DG 07 10 00Air, Moisture, Water Protection
- CU DG 07 20 00Thermal Insulation
- CU DG 07 30 00Shingles, Roof Tiles and Covering
- CU DG 07 40 00Manufactured Siding and Cladding Panels
- CU DG 07 50 00Membrane Roofing and Parapets
- CU DG 07 80 00Fire and Smoke Protection
- CU DG 07 90 00Sealants
- CU DG 08 11 13Hollow Metal Doors and Frames
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.