Publisher profile
City of Fort Saskatchewan
Applies to: Fort Saskatchewan, Alberta, Canada
Is this your organization? Raise a concern or correction
Item standards
- Fort Saskatchewan Engineering and Servicing StandardsEngineering and Servicing Standards
- FS ESS 1.0GENERAL DESIGN CONSIDERATIONS
- FS ESS 1.1Sustainability and Asset Management
- FS ESS 1.2Independent Utilities
- FS ESS 1.3Utility Rights-of-Way
- FS ESS 1.4Utility Separation
- FS ESS 1.5Trenchless Technologies
- FS ESS 2.0WATER DISTRIBUTION
- FS ESS 2.1Water Distribution General Principles and Objectives
- FS ESS 2.10Pipe Material
- FS ESS 2.11Dead Ends/Cul-de-sacs
- FS ESS 2.12Depth of Cover
- FS ESS 2.13Grade
- FS ESS 2.14Alignment (Engineering and Servicing Standards, Section 2.14)
- FS ESS 2.15Valves
- FS ESS 2.16Hydrants
- FS ESS 2.17Cathodic Protection
- FS ESS 2.18Thrust Restraint
- FS ESS 2.19Service Connections (Engineering and Servicing Standards, Section 2.19)
- FS ESS 2.2Metering
- FS ESS 2.20Trenching, Bedding and Backfilling
- FS ESS 2.21Cleaning and Preliminary Flushing
- FS ESS 2.22Hydrostatic Testing
- FS ESS 2.23General Disinfection, Flushing and Bacteriological Procedures
- FS ESS 2.24List of Standard Drawings and Forms
- FS ESS 2.3Water Demand
- FS ESS 2.4Fire Flow
- FS ESS 2.5Design Flows for Watermains
- FS ESS 2.6Pressure
- FS ESS 2.7Roughness Coefficient
- FS ESS 2.8Water Storage
- FS ESS 2.9Minimum Pipe Diameter (Engineering and Servicing Standards, Section 2.9)
- FS ESS 3.0SANITARY COLLECTION
- FS ESS 3.1Sanitary Collection General Principles and Objectives
- FS ESS 3.10Minimum Pipe Diameter (Engineering and Servicing Standards, Section 3.10)
- FS ESS 3.11Minimum Sanitary Pipe Grades
- FS ESS 3.12Curved Sewers (Engineering and Servicing Standards, Section 3.12)
- FS ESS 3.13Depth
- FS ESS 3.14Manholes
- FS ESS 3.15Testing of Sewers
- FS ESS 3.16Camera
- FS ESS 3.17Pipe Locations and Corridors
- FS ESS 3.18Service Connections (Engineering and Servicing Standards, Section 3.18)
- FS ESS 3.19Sanitary Lift Stations
- FS ESS 3.2Design Flow
- FS ESS 3.20List of Standard Drawings (Engineering and Servicing Standards, Section 3.20)
- FS ESS 3.3Peaking Factors
- FS ESS 3.4Extraneous Flow Allowance
- FS ESS 3.5Total Design Flow for Sanitary Sewers
- FS ESS 3.6Sizing of Sanitary Sewers
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.