Publisher profile
City of Whitehorse
Applies to: Whitehorse, Yukon, Canada
Is this your organization? Raise a concern or correction
Item standards
- SSM 1.1Definitions
- SSM 1.2Plan Approval
- SSM 1.3Construction
- SSM 1.4Construction Completion Certificate
- SSM 1.5Final Acceptance Certificate
- SSM 1.6Closeout Submittals
- SSM 2.1General Conditions
- SSM 2.10Street Lighting
- SSM 2.2Preparation of Engineering Drawings
- SSM 2.3Water Distribution System
- SSM 2.4Sanitary Sewer System
- SSM 2.5Storm Drains
- SSM 2.6Sewer and Water Service Connections
- SSM 2.7Roads
- SSM 2.8Landscaping (Servicing Standards Manual, Design Criteria, Section 2.8)
- SSM 2.9Lift Stations
- SSM 3.1Clearing
- SSM 3.10Adjustment of Appurtenances
- SSM 3.11Subgrade Preparation
- SSM 3.12Granular Base Course
- SSM 3.13Granular Sub-base
- SSM 3.14Granular Surface Works
- SSM 3.15Curb, Gutter, Sidewalks and Interlocking Block Pavers
- SSM 3.16Permanent Linemarking
- SSM 3.17Hot Mix Asphalt
- SSM 3.18Warm Mix Asphalt
- SSM 3.19Prime Coat and Tack Coats
- SSM 3.2Grubbing and Stripping
- SSM 3.20Seal Coats and Fog Coats
- SSM 3.21Traffic Control and Street Identification Signs
- SSM 3.22Landscaping (Servicing Standards Manual, Construction Standard, Section 3.22)
- SSM 3.23Supply and Delivery Asphalt Emulsion
- SSM 3.24Bituminous Surface Treatment Single Application
- SSM 3.25Material Specifications for Bituminous Surface Treatment Aggregate
- SSM 3.26Minimum Test Frequency
- SSM 3.3Culverts
- SSM 3.4Trenching and Backfilling
- SSM 3.5Watermains
- SSM 3.6Forcemains
- SSM 3.7Storm and Sanitary Sewer Mains
- SSM 3.8Water Service Connections
- SSM 3.9Sewer Service Connections
- SSM A1.0Trenching Widths
- SSM A1.1Pipe Bedding Details
- SSM A2.0Standard On-Line Hydrant Detail
- SSM A2.1Standard Valve Installation Detail
- SSM A2.2Reaction Block Details
- SSM A2.3Typical Water & Sewer Line Crossing Details
- SSM A2.4Bollard Detail
- SSM A3.0Standard Frames and Covers for Catch Basins & CB Manholes
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.