Publisher profile
Hydro One Networks Inc.
Applies to: Ontario, Canada
Is this your organization? Raise a concern or correction
Item standards
- DL11-301-0500Retail Metering, Overhead 1-Phase (2.4-16kV)
- DL11-301-0501Retail Metering, Overhead 1-Phase (2.4-16kV, Alternate Arrangement)
- DL11-302-0500Retail Metering, Overhead 3-Phase (2.4/4.16-16/27.6kV)
- DL11-302-0501Retail Metering, Overhead 3-Phase (2.4/4.16-16/27.6kV, Alternate Arrangement)
- DL11-302.1-0500Retail Metering, Subtransmission (27.6-44kV)
- DL11-302.1-0501Retail Metering, Subtransmission (27.6-44kV, Alternate Arrangement)
- DL11-305-0500Central Metering for Secondary Drop Leads (1-CT)
- DL11-305-0501Central Metering for Secondary Drop Leads (1-CT, Alternate Arrangement)
- DL11-307Central Metering for Secondary Drop Leads (2-CT)
- DL12-301-0500Overhead Grounding on Wood Poles
- DL12-402-0500Additional Grounding Improvements
- DL3-101.1-0500Primary 1-Phase Tangent, 2.4-16kV
- DL3-102.1-0500Primary 1-Phase Line Angle (Up to 15 Degrees)
- DL3-103-0500Primary 1-Phase Line Angle (16 to 60 Degrees)
- DL3-104-0500Primary 1-Phase Line Angle (61 to 90 Degrees)
- DL3-105-0500Primary 1-Phase Dead-End
- DL3-106-0500Primary 3-Phase Tangent
- DL3-107-0500Primary 3-Phase Line Angle (Up to 15 Degrees)
- DL3-108.1-0500Primary 3-Phase Line Angle (16 to 60 Degrees)
- DL3-108.2-0500Primary 3-Phase Line Angle (16 to 45 Degrees)
- DL3-109-0500Primary 3-Phase Line Angle (61 to 90 Degrees)
- DL3-110.1-0500Primary 3-Phase Dead-End (Vertical)
- DL3-110.3-0500Primary 3-Phase Dead-End (Crossarm Flat)
- DL3-114-0500Primary 3-Phase Tangent/Line Angle (Single Circuit)
- DL4-201-0500Crib Heights for Wood Poles in Swamp
- DL4-202-0500Swamp Cribbing with Steel Culvert (Solid Earth)
- DL4-203-0500Swamp Cribbing with Steel Culvert (No Solid Earth)
- DL4-206-0500Pole Mounts for Rock
- DL4-206-0501Pole Mounts for Rock (Alternate Arrangement)
- DL4-207-0500Depth Reduction Using Steel Culvert Supports
- DL5-101Down Guy(s)
- DL5-102Span and Anchor Guy
- DL5-103-0500Strut Guy
- DL5-106Guy Attachment to Poles (Primary Circuits)
- DL5-109Guy Subassemblies
- DL5-201Power-Installed Screw Anchors (PISA)
- DL5-202-0500Earth Screw Anchor
- DL5-205Log (Slug) Anchor in Swamp
- DL5-207-0500Rock Anchor (Solid Hard)
- DL5-208-0500Shale and Limestone Anchor
- DL5-209-0500Expanding Rock Anchor
- DL6-101-0500Minimum Vertical Clearances of Wires and Cables Above Ground
- DL6-104.1-0500Clearances to Freestanding Signs and Streetlights
- DL6-106-0500Clearances Over Swimming Pools
- DL6-201-0500Excavation Zones Around Unguyed Poles
- DL6-202-0500Excavation Zones Around Guyed Poles
- DL6-202-0501Excavation Zones Around Guyed Poles (Alternate Arrangement)
- DL9-102-05001-Phase Transformer on Customer Pole
- DL9-104-05003-Phase Transformer on Customer Pole
- DU11-101Secondary Cable from Ducted Trench to Meterbase
Approved products
8 products carry a Hydro One Networks Inc. approval.
- Composite Utility PoleRSP-0500-F-0205-CRS Technologies (Resilient Structures)
- Concrete Utility PoleClass H, 60 Foot LengthStresscrete Group
- Pad-Mounted TransformerCam Tran Co. Ltd.
- Pole-Mounted Capacitor BankCooper Power CEP11057A1Eaton
- Precast Concrete Transformer VaultBrooklin Concrete Products
- Single-Phase Pole-Mounted RecloserVersa-Tech XC (PSC8627111101R)Continental Ind
- Single-Phase Step Voltage RegulatorCooper Power VRC311KCL710003W7AEaton
- Steel Utility PoleVC045C3Valmont/Polefab
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.