Publisher profile
Massachusetts Department of Transportation (MassDOT)
Applies to: Massachusetts, United States
Is this your organization? Raise a concern or correction
Item standards
- 121.0.1General Notes for Rock Cut Section
- 121.0.2Rock Cut Section with Angled Foreslope
- 121.0.3Rock Cut Section with Flat and Angled Foreslope
- 121.0.4Reference Rockfall Catchment Area Widths Based on FHWA SPR-(032) Rock Fall Design Guide For 40ft, 50ft, 60ft, 70ft, and 80ft Rock Cut Heights
- 121.0.5Rock Cut Catchment Percent Retention Based on Functional Classification of Roadways
- 123.0.1Limit of Muck Excavation
- 150.0.1Method of Rounding Slopes- Cut and Fill Slopes
- 201.0.1Concrete Block Catch Basin
- 201.0.2Precast Concrete Catch Basin
- 201.0.3Precast Concrete Catch Basin Tub
- 202.0.1Concrete Block Manhole - Manholes 9' or Less in Depth
- 202.0.2Precast Concrete Manholes 9' or Less in Depth
- 202.2.1Concrete Block Manhole - Manholes Over 9' in Depth
- 203.0.1Special Manholes for 36" to 84" Diameter R.C. Pipe
- 204.0.1Gutter Inlet
- 205.0.1Dry Stone Masonry Leaching Basin
- 205.0.2Concrete Block Leaching Basin
- 206.0.1Drop Inlets Type A - Precast Concrete Type B - Concrete Block
- 206.1.1Drop Inlets Type AF - Precast Concrete Type BF - Concrete Block
- 208.0.1Drop Inlet Type C
- 208.1.1Drop Inlet Type CF
- 208.1.2Flush Drop Inlet Throat
- 209.0.1Drop Inlet Type D
- 209.1.1Drop Inlet Type DF
- 221.0.1Manhole Frame and Cover - A Frame
- 221.0.2Manhole Frame and Cover - B Frame
- 221.0.3Manhole Cover Details
- 222.0.0Catch Basin Frame
- 222.0.1Hook Lock Bar Grate
- 222.0.2Frame and Hook Lock Bar Grate- Frame Assembly Details
- 222.1.1Hook Lock Cascade Grate- Flow From Left
- 222.1.2Frame and Hook Lock Cascade Grate- Flow From the Left- Assembly Details
- 222.1.3Hook Lock Cascade Grate- Flow From Right
- 222.1.4Frame and Hook Lock Cascade Grate- Flow From the Right- Assembly Details
- 222.2.1Drop Inlet Grate
- 223.0.1Concrete Collars
- 224.0.1Catch Basin Hood
- 230.0.1Concrete and Field Stone Masonry Pipe Ends for 8" to 30" Pipe
- 230.0.2Concrete and Fieldstone Masonry Pipe Ends for Combination Pipes up to 30"
- 230.0.3Concrete and Fieldstone Masonry Pipe Ends for 30" to 84" Pipe Culverts
- 230.1.1Corrugated Metal Pipe Under Fill Slope
- 230.7.1Standard Metal End
- 232.0.1Half Circle CCM Pipe Waterways
- 242.0.1Reinforced Concrete Pipe Flared Ends
- 242.0.2Concrete Splash Pads
- 258.0.0Quantity Tables for Concrete and Field Stone Masonry Pipe Ends
- 258.0.1Stone Pipe Ends for Pipes 24" and Less in Diameter
- 260.0.1Subdrain
- 280.0.1Paved Waterways and Apron
- 280.0.2Paved Waterways
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.