Publisher profile
South Dakota Department of Transportation (SDDOT)
Applies to: South Dakota, United States
Is this your organization? Raise a concern or correction
Item standards
- 120.01Intersecting Roads and Entrances
- 120.02Ditch Block
- 120.03Public Access Median Crossover
- 120.04Standard Maintenance Crossover for Interstate Highways
- 120.05Inslope Transitions at Pipe Culverts or Reinforced Concrete Box Culverts
- 120.06Grading at Railroad Crossing
- 120.10Bridge Berm (Nonprojecting Embankment)
- 120.11Bridge Berm (Projecting Embankment)
- 120.20Historical Marker Turnout
- 320.01Surfacing or Resurfacing of Intersecting Roads and Entrances (Shoulders: Granular Material or Cold Recycled Material)
- 320.04Surfacing or Resurfacing of Intersecting Roads and Entrances (Mainline and Shoulders: PCC or AC Pavement)
- 320.14Asphalt Concrete Curb
- 320.15Asphalt Concrete Shoulder Joint Adjacent to PCC Pavement
- 320.1812" Centerline Rumble Stripe in Asphalt Concrete
- 320.208" Rumble Stripe in Asphalt Concrete on Nondivided Highway Shoulders
- 320.2212" Rumble Stripe in Asphalt Concrete on Nondivided Highway Shoulders
- 320.2412" Rumble Strip in Asphalt Concrete on Nondivided Highway Shoulders
- 320.2612" Rumble Strip in Asphalt Concrete on Divided Highway Median Shoulder
- 320.2812" Rumble Strip in Asphalt Concrete on Divided Highway Shoulders
- 320.3012" Rumble Strip in Asphalt Concrete on Interstate Median Shoulder
- 320.3212" Rumble Strip in Asphalt Concrete on Interstate Shoulders
- 320.40Sinusoidal Centerline Rumble Stripe in Asphalt Concrete
- 320.45Transverse Rumble Strip in Asphalt Concrete Highway Adjacent to Stop Controlled Intersection
- 320.46Sinusoidal Transverse Rumble Strip in Asphalt Concrete Highway Adjacent to Stop Controlled Intersection
- 320.508" Sinusoidal Rumble Stripe in Asphalt Concrete on Nondivided Highway Shoulders
- 380.01PCC Pavement Dowel Bar Alignment Tolerances
- 380.04PCC Pavement Dowel Bar Assembly for Transverse Contraction Joints 12 Bar Assembly on Granular Base Material
- 380.05PCC Pavement Dowel Bar Assembly for Transverse Contraction Joints 12 Bar Assembly on Hard Surfaced Base Material
- 380.06PCC Pavement Dowel Bar Assembly for Transverse Contraction Joints 9 Bar Assembly on Granular Base Material
- 380.07PCC Pavement Dowel Bar Assembly for Transverse Contraction Joints 9 Bar Assembly on Hard Surfaced Base Material
- 380.12PCC Pavement Transverse Contraction Joint With or Without Dowel Bar Assembly
- 380.13PCC Pavement Beveled Transverse Contraction Joint With or Without Dowel Bar Assembly
- 380.14PCC Pavement Mid Panel Transverse Construction Joint
- 380.15PCC Pavement Transverse Construction Joints with Tie Bars or Dowel Bars
- 380.16Reseal PCC Pavement Joint (Silicone)
- 380.20PCC Pavement Longitudinal Joints with Tie Bars
- 380.21PCC Pavement Longitudinal Construction Joints with Concrete Gutter or Concrete Curb and Gutter
- 380.22PCC Pavement Longitudinal Joints without Tie Bars
- 380.30PCC Fillet Section with Type B Curb and Gutter
- 380.31PCC Fillet Section with Type F Curb and Gutter
- 380.33PCC Fillet Section for Transitioning from Modified Gutter to Standard Gutter
- 380.35Mountable Type Median PCC Pavement
- 380.36Barrier Type Median Pavement
- 380.40Type A PCC Approach Pavement
- 380.41Type B PCC Approach Pavement
- 380.42Type C PCC Approach Pavement
- 380.50Transverse Rumble Strip in PCC Pavement Highway Adjacent to Stop Controlled Intersection
- 380.51Sinusoidal Transverse Rumble Strip in PCC Pavement Highway Adjacent to Stop Controlled Intersection
- 380.53Rumble Strip on PCC Pavement Shoulder
- 380.56Sinusoidal Centerline Rumble Stripe in PCC Pavement
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.