Publisher profile
Town of Tillsonburg
Applies to: Tillsonburg, Oxford County, Ontario, Canada
Is this your organization? Raise a concern or correction
Item standards
- Tillsonburg Development Guidelines and Design CriteriaDevelopment Guidelines and Design Criteria
- Tillsonburg DGDC Section 1Section 1 - General Preface
- Tillsonburg DGDC Section 10Section 10 - Storm Sewers
- Tillsonburg DGDC Section 11Section 11 - Stormwater Management
- Tillsonburg DGDC Section 14Section 14 - Lot Grading
- Tillsonburg DGDC Section 15Section 15 - Parkland and Streetscapes
- Tillsonburg DGDC Section 2Section 2 - Subdivision Approval Process
- Tillsonburg DGDC Section 3Section 3 - Subdivision Submission
- Tillsonburg DGDC Section 4Section 4 - Site Plan Approval
- Tillsonburg DGDC Section 5Section 5 - Site Plan Submission
- Tillsonburg DGDC Section 6Section 6 - Site Plan Additional Guidelines
- Tillsonburg DGDC Section 7Section 7 - Roadways
- Tillsonburg DGDC Section 8Section 8 - Streetlighting
- Tillsonburg DGDC Section 9Section 9 - Utilities
- TSD-1010Maintenance Hole and Catch Basin Adjustment Units
- TSD-1100Outlet Structure Typical Detail Wet Pond Facility with Maintenance Pipe
- TSD-1101Outlet Structure Typical Detail Wetland Facility without Maintenance Pipe
- TSD-1102Temporary Outlet Structure Typical Detail
- TSD-1103SWM Facility Grading and Water Level Criteria
- TSD-1104Outlet Erosion Protection Typical Detail
- TSD-1105Forebay Hickenbottom Detail
- TSD-1106Stormwater Planting Zone Composition
- TSD-1110Stormwater Management Pond Warning Sign
- TSD-1200PVC Inside Drop Sewer Service Connection
- TSD-1201PVC Inside Drop Sewer Maintenance Hole
- TSD-1300General Notes Watermain
- TSD-1301Tracer Wire Detail
- TSD-1306Typical Cul-de-sac Watermain Design (50mm Dia. Loop)
- TSD-1307Typical Insulation Detail
- TSD-1320Typical Service Entry 100mm to 300mm Diameter Pipe
- TSD-1326Typical Two Piece Circular Chamber Details for Watermain
- TSD-1327Typical Two Piece Rectangular Chamber Details for Watermain
- TSD-1331Hydrant Platform Detail
- TSD-1340Temporary Riser Installation
- TSD-1350Valve Stem Extension in Valve Box
- TSD-136050mm Blow Off Detail
- TSD-1366Watermain Lowering Detail for Storm Sewer or Ditch Crossing
- TSD-1367Support for Watermains Larger than 300mm Dia.
- TSD-1368Watermain Rail Crossing Detail
- TSD-1400Rear to Front Yard Drainage
- TSD-1401Shared Storm Easement
- TSD-1402Rear Yard Catchbasin
- TSD-1403Upper to Lower Lot Drainage
- TSD-1404Typical Side Yard Drainage
- TSD-220Unassumed Road Signs
- TSD-221Typical Title Pages
- TSD-222General Notes
- TSD-223Typical Project Identification Sign
- TSD-230Foundation Drain Outlet Sump Pump to Storm Sewer at Surface
- TSD-300Standard Residential Service Locations 10.5m Lot
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.