Location
Langley Township construction standards and drawings
1 publisher cover Langley Township, with 107 item standards and 0 general provisions indexed in the Public Standards Directory.
Search this location in the directoryRecently updated standards
- TLW 16Residential Reduced Pressure Backflow AssemblyTownship of Langley
- TLW 15Water Services for Boulevard LandscapingTownship of Langley
- TLW 14Minimum Clearances for Reduced Pressure Backflow Assembly and Reduced Pressure Detector Assembly InstallationsTownship of Langley
- TLW 13Minimum Clearance for Double Check Valve Assembly and Double Check Detector Assembly InstallationsTownship of Langley
- TLW 12Piping and Chamber Detail for 75mm to 250mm Water Meters - Bypass InsideTownship of Langley
- TLW 11Piping Detail for 100mm to 250mm Fire Line Meters - Inside SettingTownship of Langley
- TLW 10Piping Detail For 75mm To 250mm Water Meters - Inside SettingTownship of Langley
- TLW 09Piping Detail for 25mm to 50mm Water Meters - Inside SettingTownship of Langley
- TLW 08Water Service Connection for Sprinklered Homes (38mm or 50mm)Township of Langley
- TLW 07Piping and Chamber Access Detail for 75mm to 250mm Water Meters - Outside SettingTownship of Langley
- TLW 06Water Meter Chamber for 25mm, 38mm, and 50mm Service ConnectionsTownship of Langley
- TLW 05Typical Water Meter and Backflow Device Installations - Outside SettingTownship of Langley
- TLW 04Recommended Meter / Backflow / PRV Assembly PatternTownship of Langley
- TLW 03Air and Vacuum Valve ChamberTownship of Langley
- TLW 02Watermain Blow-OffTownship of Langley
- TLW 01Watermain Fitting Minimum Thrust Block AreaTownship of Langley
- TLS 06Sanitary Blowdown AssemblyTownship of Langley
- TLS 05Sanitary Air and Vacuum Valve ChamberTownship of Langley
- TLS 04Private Residential Low Pressure Sanitary ServiceTownship of Langley
- TLS 03Valve Box CoverTownship of Langley
Reference only. Always verify before you specify.
This directory is compiled from publicly available sources and may contain errors, omissions, or out-of-date entries. FieldWorks does not publish, approve, certify, or endorse any standard or product; approval listings are reproduced from the issuing authority's own published lists. Confirm the current edition with the publisher or authority before relying on it in a contract, and use the flag buttons in the directory to report anything that looks wrong. Use of the directory is subject to our Terms of Service, including the prohibition on bulk extraction and automated scraping.
Put this standard to work.
This same search is built into the FieldWorks Item Specification Composer, where a pick becomes a tender item with the reference, unit, and special provision already wired.